Main function: Compress the cilia of the original yarn by the slurry, so that the cilia will not stick to the cotton ball due to friction on the loom
Drawing-in: The raw sizing yarn passes through three accessory parts such as the warp drop, heald and steel reed to facilitate the weaving of the warp drop: one of the induction devices to prevent the warp from breaking, and the induction can be completed by cooperating with the warp bar.
Heald wire: one of the equipment to change the weave pattern of the weaving, it can complete the change of the weave pattern by cooperating with the peach pan and heald of the loom
Steel reed: weaving can be completed with the input of the weft and the change of the heald
On the machine: a kind of action to hang the threaded shaft yarn on the loom through the carriage of the locomotive.
Self-joining: The beam after sizing does not need to be drawn through and is directly completed by the action of the knotting machine, and the result is the same as on the machine.
Weaving: Put the threaded shaft yarn on the loom with the input of weft and the operation of the loom to complete the weaving action.
Blank inspection: After weaving, the fabric inspector will complete the inspection according to CNS inspection standards to understand the quality of the fabric after weaving is completed, so as to benefit the functional woven fabric of the original fabric dyeing: it is composed of two or more groups The mutually perpendicular yarns are interwoven with warp and weft at a 90 degree angle to form a fabric. The longitudinal yarns are called warp yarns, and the horizontal yarns are called weft yarns.
Each intersection point between warp and weft is called the organization point, which is the smallest basic unit of woven fabric. Because the place where the warp and weft interweave is somewhat bent, and the moraine is bent in the direction perpendicular to the plane of the fabric, the degree of bending is related to the mutual tension between the warp and weft and the yarn stiffness. When the woven fabric is subjected to external tension, such as longitudinal When stretching, the tension of the warp yarn increases, and the bending decreases, while the bending of the weft yarn increases, such as longitudinal stretching continuously until the warp yarns are completely straightened, and the fabric shrinks in the transverse direction. When the woven fabric is stretched transversely by external tension, the tension of the weft yarn increases, and the bending decreases, while the warp yarn bending increases, such as the transverse stretching continues until the weft yarn is fully straightened, and the fabric shrinks longitudinally. The warp and weft will not change, which is different from knitted fabrics. Because the warp and weft of the woven fabric have little relationship with the extension and contraction, and no conversion occurs, the fabric is generally tight and stiff. The physical and mechanical properties of woven fabrics include the yarn density of warp and weft, selvage, front and back, forward and reverse wool direction, and fabric coverage.


